FAQ

 

Could APOGEE low power SO-DIMM series memory modules provide long standby time for notebook battery?

Yes.
With low power designed IC, APOGEE low power SO-DIMM series can reduce about 40% power consumption.
“All-in-House” process is implemented with the solid “wafer-in, module-out” model, giving the most quality control and stability.
APOGEE low power SO-DIMM series use 20% less power than its counterparts.
(In comparison with other brands)
Extend standby hours up to 10%.
(The extended standby time may be varied due to the different model / setting by notebook manufacturers.)

After installing APOGEE memory, I have problem booting the system
Turn off the computer and reinstall APOGEE. If you still can’t boot your computer, please remove other memory devices and reinstall APOGEE once again..
If you are sure APOGEE is properly installed and the specification is compatible with system requirements, however, the problem persists.  Please bring your purchase to original retailer for exchange or contact us for support. 
After installing APOGEE, screen jumps to configuration setup or automatically re-boot 
Please turn off the computer and reinstall APOGEE. If the problem persists , remove other memory devices and reinstall APOGEE.
Check if there is track damage of system hard disk and try reinstall your operating system.  If the problem still cannot resolve, bring your purchase to original retailer for exchange or contact us for support.
My PC does not run comparatively faster after the installation
Upgrading memory in capacity shortens the data transmission time from and to CPU, not necessarily increasing running speed of the system.
Can both DDR 400 and DDR 333 memory modules be installed together?
Yes, however, it might occur that either the OS picks up the data rate with lower frequency or system reboots due to memory failure. 
It is recommended to use memory modules of same data rate.
1 | 2 | 3 | 4 | Next Page >